Thin Cutting Planer, Wood Planer Machine 
The P-62 Thin Cutting Planer is normally used together with a thin cutting frame saw. The P-62 is designed especially for precision thickness cutting for thin board. Under normal condition, the machine can easily reach ±0.025mm tolerance range.
The P-62 Thin Cutting Planer is designed with all new concepts and is patented. In particular, the board pressure system employs piano-key type pressure shoes, which holds board firmly. This fully prevents board from chamferring or tearing during cutting.
 |
|
|
Patented Cutterhead Design
|
Specially Designed Steel Roller and Conveyor Belt All 6 steel rollers are powered transmission. This combines with high quality conveyor belt to achieve cutting accuracy within ±0.025mm. |
|
|
|
 |
|
| Stable Conveyor Table The conveyor table is supported by 4 precision screws to ensure high stability during machining. |
Accurate Cnveyor Table Positioning The conveyor table elevation and positioning is set and displayed by a digital ocntroller. It provides high positioning accuracy up to 0.01mm. |
|
|
|
 |
Variable Spindle Speeds The Spindle rotation is controlled by a frequency inverter, permitting variable speed change. Wide speed range is from 1800 rpm to 5600 rpm. This makes the machine suitable for cutting various wood materials, such as soft and hard wood, moisturized wood and oily wood etc. |
 |
|
|
Variable Feed Speed The conveyor belt speed is controlled by a frequency inverter, permitting variable speed change. This makes the machine suitable for cutting various wood materials, such as soft and hard wood, moisturized and oily wood etc. |
High Performance Control Circuit We use only the world-famous electronic parts in the control cabinet, that assure the best control performance and long service life. |
| Model | P-62 |
|---|---|
| Motor of main shaft | 15 HP |
| Motor of feeding | 2 HP |
| Minimum thickness of cut | ≥ 2.0 mm |
| Maximum thickness of cut | 120 mm |
| Maximum width of cut | 610 mm |
| Motor of elevator | 0.2 HP |
| Net weight | 1600 KG |
| Miimimum length of cut | 300 mm |
| Rotation speed of main shaft | 1800 ~ 5600 rpm |
| Speed of feeding | 7 ~ 21 m/min |
Specifications, dimensions, and design characteristics are subject to change without previous notice.
