Band Saw Blade Sharpener, Band Saw Blade Sharpening 
Designed to Maximize Blade Service Life While Minimizing Blade Consumption.
- The wet grinding feature assures extremely fine finish on teeth surfaces and greatly extends cutting period of sawblade.
- Grinding amount adjustment is accurately indicated by dial gauges.
 |
 |
| High precision blade feed mechanism ensures accurate fine grinding, while reducing grinding loss to a minimum. | Front Tack Angle Adjustment On Same Axis(Patented) Easy to adjust front rake angle without affecting teeth profile and other adjustments. |
 |
 |
| Big Range Adjustment for Blade Sizes Range of blade width: 25mm~100mm. Range of tooth pitch: 12mm~32mm. |
Precision Spindle The spindle runs in high speed precision bearings, that assures teeth accuracy and increased blade life. |
 |
 |
| Teeth Number Setting Grinding teeth setting is conveniently fast made by means of the externally mounted setting device. |
Convenient, Fast Blade Clamping Mechanism The performance of the blade clamping mechanism may affect feed accuracy and finish of grinding surface. |
Band Saw Blade Sharpener 
| MODEL | G-20 |
|---|---|
| Motor | 1/2 HP, 1/4 HP, 1/8 HP |
| Blade thickness | <2 mm |
| Blade width | 25-100 mm |
| Blade length | Unlimited |
| Tooth pitch | 12-32 mm |
| Tooth height | ≤ 8 mm |
| Front rake angle | 5-15 Degrees |
| Working speed | 6 Sec./tooth |
Frame Saw Blade 
| Blade Specifications | |
|---|---|
| Material | S, L, M, H, T, C |
| Blade length | 420, 500, 550 mm |
| Blade height | 40, 45 mm |
| Cuting loss | 0.9, 1.0, 1.1, 1.25, 1.4, 1.6 mm |
| Tooth pitch | 13, 15, 20 mm |
All specifications, dimensions, and design characteristics shown in this catalog are subject to change without previous notice.
